McNETT® - Essentials for Adventure^TM

Wader Repair

• Instant Repairs

  • 
  • 

    Field Repair:

    For instant field repairs, use the Wader Field Repair Kit.

  • 

    Step 1:

    Apply a patch over tear on outside of wader. Apply Aquaseal to tear on inside of wader and 1/4 inch beyond the tear

  • 

    Step 1:

    Cover with another patch. Waders can be used immediately. Patches can be removed in 2-3 days.

• Replace Felt Soles

  • 
  • 

    Step 1:

    To attach New felt soles, remove old felt (if necessary). Lightly roughen rubber soles with sandpaper then wipe rubber soles with Cotol-240 or isopropyl alcohol.

  • 

    Step 2

    Apply Aquaseal to outer edge of new felt soles and attach to boot. Clamp in place and allow Aquaseal to dry level 8 to 12 hours.

• Repair Felt Soles

  • 
  • 

    Step 1:

    To repair peeling felt soles, clean and dry peeling area. Apply Aquaseal in gap and close.

  • 

    Step 2

    Use patch (included in the Wader Repair Kit) to hold area closed overnight.