McNETT® - Essentials for Adventure^TM

Tent Seam Sealing

• 
• 

  Step 1:

  Apply Seam Grip^® Seam Sealer & Outdoor Repair to the inside of the perimeter floor seam; this seam is often not taped at the factory. Draw seam sealer across threads and under folds. For 2 hour cure time, mix Seam Grip with Cotol-240^TM before applying. Allow tent to dry overnight before using or storing.

• 

  Step 2:

  Use Seam Grip^® to seal areas that regularly leak, such as stake-out points at corners.

• 

  Step 3:

  After years of service, seam tape on tents and outerwear can peel or pucker and the seam will begin to leak. If a small section has peeled, use Seam Grip^® to re-attach it. If the tape seems to be failing everywhere, remove and discard it, then clean the seams with rubbing alcohol and re-seal with Seam Grip or Seam Sure^TM.

• 

  Step 4:

  Seam Sure^TM Water Based Seam Sealer is the easiest formula to use on large family style tents. Apply Seam Sure as you would Seam Grip. Once dry, Seam Sure is nearly invisible.

• 

  Step 5:

  To seal the seams on your rainfly, set it up inside-out for easier application. Attach the rainfly to the tent so all seams are taut.