Seal Wader Seams
-
-
Step 1:
To seal wader seams, turn waders inside out and examine seams and fabric for gaps, Apply Aquaseal directly to the seam, extending over seam and on to fabric by 1⁄4 inch.
-
Step 2:
Use brush to work Aquaseal under fabric folds and into stitching. Allow Aquaseal to cure 8 to 12 hours.
Find more great tips like these in our Repair Guide
-
Climbers and hikers create tough toe caps with Freesole to protect boots from sharp rocks and crampons.
-
Relieve pressure and give your boots a custom fit with these lacing tricks. 1. Use “Skip Lacing” to take pressure off sensitive areas 2. Use the “Double Wrap” to have different levels of tightness on upper and lower sections of the boot.