McNETT® - Essentials for AdventureTM

Repair Float Tubes with Aquaseal

  • Bookmark and Share
  • Repair float tubes

    Step 1:

    Unzip float tube cover. Soak the tip of rag in soapy water and dab over the area suspected to be leaking. The hole will produce bubbles. Mark the spot with a pen, clean off the soapy residue then allow area to dry.

  • Repair float tubes

    Step 2:

    Prep surface using rubbing alcohol. Apply Aquaseal to extend 1 inch around hole on all sides. Allow Aquaseal to dry level 8 to 12 hours.

Find more great tips like these in our Repair Guide

  • Wader Repair

    Wader Repair

    To find leaks in Gore-Tex® waders, soak the tip of a rag in rubbing alcohol and dab over the suspect area. The hole will show up as a contrasting color against the rest of the wader. Allow area to dry and seal with Aquaseal.
  • Tent Condensation Tip

    Tent Condensation Tip

    Minimize condensation in tents by keeping upper tent vents open, and lower vents clear of sleeping bags, pads and other bulky items.